How to Reset Epson Printer Waste Ink Counter by WIC Utility
If you have an Epson printer that shows an error message like \"The Printer's Ink Pads are at the end of their service life\" or \"A printer's ink pad is at the end of its service life. Please contact Epson Support\", you may need to reset the waste ink counter by using a software tool called WIC Reset Utility.
WIC Reset Utility is a program that can help you to reset the waste ink counters inside your Epson printer. It supports many models of Epson printers and it is compatible with Windows, Mac and Linux operating systems. You can download the latest version of WIC Reset Utility from here.
To use WIC Reset Utility, you will need a reset key, which is a code that allows you to perform one reset operation. You can buy a reset key online from here or you can get a free trial reset key from here. The trial reset key will reset the waste ink counter to 80% one time only.
Here are the steps to reset your Epson printer waste ink counter by WIC Reset Utility:
Download and run WIC Reset Utility on your computer.
Select your printer model and port in the program.
Click on \"Read waste counters\" button to check the current value of the waste ink counter.
If the counter is more than 100%, you will need to reset it.
Enter your reset key in the \"Enter reset key here\" box and click on \"Reset waste counters\" button.
Wait for the program to complete the reset process and show a confirmation message.
Turn off your printer and turn it on again.
Check if the error message is gone and your printer is working normally.
Congratulations! You have successfully reset your Epson printer waste ink counter by using WIC Reset Utility. If you have any questions or problems, you can contact WIC Support here.
WIC Reset Utility is not only a tool to reset the waste ink counter, but also a tool to perform other maintenance functions on your Epson printer. For example, you can use WIC Reset Utility to check the ink level, clean the printhead, read and write serial number, and update the firmware.
To access these functions, you need to click on the \"Maintenance\" tab in the program. Then you can select the function you want to perform and follow the instructions on the screen. Some functions may require a reset key, whi